ADTRAN Network Card 1204006L2 User Manual

For more detailed documentation, visit us online at www.adtran.com.  
®
NetVanta ISDN BRI Dial Backup Interface Module (DIM)  
P/N 1200865L1  
Quick Start Guide  
INSTALLATION INSTRUCTIONS  
1. Remove power from the base unit.  
LAN  
CONSOLE  
2. If the Network Interface Module (NIM) is already in the NetVanta  
chassis, remove all cables from the module and release the pins at  
both edges of the NIM faceplate and slide the module out of the  
chassis.  
SLOT 1 NET/D BU  
3. Carefully align the P1 connector on the NIM with the J1 connector on  
the ISDN BRI DIM. Using only fingertip pressure so that neither circuit  
board bends or flexes, ensure that the connectors are firmly seated.  
Secure the ISDN BRI DIM to the NIM using the screws and standoff  
posts supplied.  
4. Slide the NIM with the ISDN BRI DIM attached into the NetVanta  
option slot until the NIM is firmly seated against the chassis.  
WAN-T1 DSX-1  
DBU  
5. Secure the pins at both edges of the NIM.  
6. Connect the cables to the associated device(s)  
7. Complete installation of the base unit.  
8. Restore power to the base unit.  
SPECIFICATIONS  
Features  
Clear channel and bonding mode 1 call protocols  
Network support for 64 kbps (1 B-channel)  
D-channel switch compatibility with AT&T 5ESS,  
Northern Telecom DMS-100, and National ISDN-1  
V.54 network loopback support  
For NetVanta modules with outside plant  
connections, ensure that all cables are  
removed from the module before installing  
or removing it from the NetVanta chassis.  
Compliance  
Physical  
FCC Part 15 Class A, EN 55022 Class A, EN 55024  
EN 61000-3-2, EN 61000-3-3  
ACTA/FCC Part 68, IC CS-03,  
UL/CUL 60950  
ISDN BRI DBU CONNECTION PINOUTS  
Pin  
1-3  
4
Name  
Description  
Unused  
Dimensions: 2.5-inch W x 3.75-inch D  
Operating Temperature: 0°C to 50°C  
Storage Temperature: -20°C to 70°C  
R
Network-Ring  
Network-Tip  
Unused  
Relative Humidity: Up to 95 percent, noncondensing  
5
T
6-8  
NetVanta modules should be installed only in  
NetVanta Series products.  
Important: For additional details on product  
features, specifications, installation, and safety, refer  
to the appropriate Hardware Installation Guide on  
the ADTRAN OS System Documentation CD  
shipped with the base unit and available online at  
Quick Start Guide, 61200865L1-13E, July 2006  
Technical Support 1-888-4ADTRAN (1-888-423-8726)  
 
Copyright © 2006 ADTRAN, All Rights Reserved  

3Com Network Card ISDN Modem User Manual
ADTRAN Network Card FE1 User Manual
Aero Mist Outdoor Misting Fan 52500 User Manual
Agri Fab Spreader 45 02882 User Manual
Altec Lansing Speaker CD308 16T User Manual
AMD Computer Hardware LX 600@07W User Manual
American Standard Indoor Furnishings 0490011 User Manual
Atmel Computer Hardware 8 bit Microcontrollers with Integrated USB Controller User Manual
Audiovox Car Stereo System AVD400T User Manual
Audiovox Remote Starter PRO 9171FT User Manual