Alpine Car Stereo System TDM 7574 User Manual

R
EN  
FR  
ES  
TDM-7574  
FM/ AM Cassette Receiver  
• OWNER'S MANUAL  
Please read before using this equipment.  
• MODE D'EMPLOI  
Veuillez lire avant d'utiliser cet appareil.  
• MANUAL DE OPERACIÓN  
Léalo antes de utilizar este equipo.  
ALPINE ELECTRONICS, INC.  
Tokyo office: 1-1-8 Nishi Gotanda,  
Shinagawa-ku,  
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.  
ALPINE ELECTRONICS FRANCE S.A.R.L.  
(RCS PONTOISE B 338 101 280)  
98, Rue De La Belle Etoile, Z.I. Paris Nord Il  
B.P. 50016 F-95945, Roissy, Charles De Gaulle  
Cedex, France  
6-8 Fiveways Boulevarde Keysborough,  
Victoria 3173, Australia  
Tokyo 141-8501, Japan  
Tel.: (03) 3494-1101  
Tel.: (03) 9769-0000  
ALPINE ELECTRONICS Gm b H  
Kreuzerkamp 7-11 40878 Ratingen, Germany  
Tel.: 02102-45 50  
Tel.: 01-48 63 89 89  
ALPINE ELECTRONICS OF AMERICA, INC.  
19145 Gramercy Place, Torrance,  
California 90501, U.S.A.  
ALPINE ELECTRONICS OF U.K., LTD.  
13 Tanners Drive, Blakelands, Milton Keynes  
MK14 5BU, U.K.  
ALPINE ITALIA S.p .A.  
Via C. Colombo 8, 20090 Trezzano Sul Naviglio  
MI, Italy  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Tel.: 01908-61 15 56  
ALPINE ELECTRONICS OF CANADA, INC.  
Suite 203, 7300 Warden Ave. Markham,  
Ontario L3R 9Z6, Canada  
Tel.: 02-48 47 81  
ALPINE ELECTRONICS DE ESPAÑA, S.A.  
Portal De Gamarra 36, Pabellón 32  
01013 Vitoria (Alava)-Apdo. 133, Spain  
Tel.: 34-45-283588  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Designed by ALPINE Japan  
Printed in China (Y)  
68P01149K49-O  
Melyi Printing Factory, Dalian, China  
No. 28 Chang Qing Street, Xl Gang District, Dalian, China  
 
ENGLISH  
Co nte nts  
CD Changer Operation  
Op e ra ting Instruc tions  
Controlling CD Changer (Optional) ................10  
Switching between Track No. and Elapsed  
WARNING  
Time Displays ...............................................10  
Music Sensor (M.S.) Skip ................................10  
Fast Forward and Backward ............................10  
Repeat Play on Single Track or Entire Disc ....10  
M.I.X. (Random) Play .....................................11  
WARNING.................................................. 2  
CAUTION ................................................... 2  
PRECAUTIONS ......................................... 2  
Basic Operation  
Information  
Detaching the Front Panel..................................4  
Attaching the Front Panel ..................................4  
Initial System Start-Up ......................................4  
Automatic Setup (A.S.U.) ..................................4  
Turning Power On and Off ................................5  
Turning Loudness On/Off ..................................5  
Adjusting Volume/Bass/Treble/Balance  
In Case of Difficulty ........................................12  
Specifications ...................................................13  
Insta lla tion a nd Conne c tions  
Warning ............................................................14  
Caution .............................................................14  
Precautions .......................................................14  
Installation .......................................................15  
Connections .....................................................16  
(Between Left and Right)/Fader  
(Between Front and Rear) ..............................5  
Displaying Time.................................................5  
Setting Time .......................................................5  
LIMITED WARRANTY  
Radio Operation  
Manual Tuning ...................................................6  
Automatic Seek Tuning .....................................6  
Manual Storing of Station Presets .....................6  
Automatic Memory of Station Presets ...............7  
Storing into Direct Access Preset (D.A.P.)  
Band................................................................7  
Tuning to Preset Stations ...................................7  
Cassette Player Operation  
Inserting/Ejecting Cassette ................................8  
Normal Play .......................................................8  
Repeat Play ........................................................8  
Fast Forward and Rewind ..................................9  
Blank Skip (B.SKIP)..........................................9  
Manual Reverse .................................................9  
Program Sensor (P.S.) ........................................9  
1
-EN  
 
WARNING  
WARNING  
CAUTION  
The exclamation point within an equilateral  
triangle and "WARNING" are intended to alert the  
user to the presence of important operating  
instructions.  
The exclamation point within an equilateral  
triangle and "CAUTION" are intended to alert the  
user to the presence of important operating  
instructions.  
Failure to heed the instructions will result in  
severe injury or death.  
Failure to heed the instructions can result in injury  
or material damage.  
DO NOT DISASSEMBLE OR ALTER.  
Doing so may lead to accident, fire or electric shock.  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Blocking them may cause heat to build up inside and may  
result in fire.  
KEEP SMALL ARTICLES OUT OF THE REACH OF  
CHILDREN.  
STOP THE VEHICLE IF UNIT OPERATION MIGHT  
INTERFERE WITH DRIVING.  
If swallowed, consult a physician immediately.  
USE THE CORRECT AMPERE RATING WHEN  
PRECAUTIONS  
Temperature  
REPLACING FUSES.  
Failure to do so may result in fire or electric shock.  
Be sure the temperature inside the vehicle is between  
+60°C (+140°F) and –10°C (+14°F) before turning your  
unit on.  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.  
When problems occur such as a lack of sound or video,  
foreign objects inside the unit, smoke coming out, or  
noxious odors, stop use immediately and contact the  
dealer where you bought the equipment. Failure to do so  
may result in an accident or injury.  
Tape Slack  
Check and make sure any slack in the tape is taken up  
before inserting the tape into the unit. A loose tape can get  
caught in the mechanism and cause damage to the unit  
and the tape itself. Tighten the tape by inserting a pencil  
or a similar instrument into the spindle hole and turn until  
all the slack has been taken up.  
DO NOT OPERATE THE EQUIPMENT OR LOOK AT  
THE SCREEN WHILE DRIVING THE VEHICLE.  
Operating the equipment may distract the driver from  
looking ahead of the vehicle and cause accident. Always  
stop the vehicle in a safe location before operating this  
equipment.  
DO NOT RAISE THE VOLUME EXCESSIVELY.  
Keep the volume at a level where you can still hear  
outside noises while driving. Driving while unable to hear  
outside noises could be the cause of accident.  
Excessively Thin Tape  
DO NOT USE THIS EQUIPMENT FOR PURPOSES  
C-120 type cassette tapes are not recommended for use in  
automobile tape players.  
OTHER THAN STATED FOR THE VEHICLE.  
Failure to do so may result in electric shock or injury.  
Precision Tape Mechanism  
Prevent any foreign objects from entering the cassette  
opening as the precision mechanism and tape head may be  
damaged.  
Never play dirty or dusty tapes – they can damage the tape  
head.  
DO NOT PLACE FOREIGN OBJECTS IN INSERTION  
SLOTS OR GAPS.  
Do not insert hands, fingers or foreign objects in the disc  
or cassette insertion slots, or in gaps during monitor  
startup/storage. Doing so may result in personal injury or  
damage to the equipment.  
2-EN  
 
Tape Head Cleaning  
Periodic cleaning (approximately every 20 hours of use)  
of the tape head with a wet type head-cleaning cassette  
tape (available at audio stores) is necessary for best  
performance.  
Fuse Replacement  
When replacing the fuse(s), the replacement must be of  
the same amperage as shown on the fuse holder. If the  
fuse blows more than once, carefully check all electrical  
connections for shorted circuitry. Also have your vehicle's  
voltage regulator checked.  
Maintenance  
If you have problems, do not attempt to repair the unit  
yourself. Return it to your Alpine dealer or the nearest  
Alpine Service Station for servicing.  
Installation Location  
Make sure the TDM-7574 will not be installed in a  
location subjected to:  
Direct sun and heat  
High humidity and water  
Excessive dust  
Excessive vibrations  
Handling the Detachable Front Panel  
Do not expose to rain or water.  
Do not drop or apply shock.  
3
-EN  
 
Ba sic Op e ra tion  
2
PWR  
A.S.U.  
CLK  
1
MODE/LOUD  
H
CT  
M
Detaching the Front Panel  
Initial System Start-Up  
1
2
3
Press the PWR (Power) button to turn off the  
power.  
1
Immediately after installing or applying power to  
the unit, it should be initialized. To do this, first,  
remove the detachable front panel. Behind the  
front panel, to the right of the connector, there is  
a small hole. Using a pencil or other pointed  
object, press the red reset button mounted  
behind this hole to complete the initialization  
procedure.  
Press the  
(Release) button until the front  
panel pops out.  
Grasp the left side of the front panel and pull it  
out.  
NOTES  
The front panel may become hot (especially the connector  
terminals). This is not a malfunction.  
Reset switch  
To protect the front panel, place it in the supplied carrying  
case.  
Automatic Setup (A.S.U.)  
This convenient feature sets up the unit  
automatically after installation.  
1
Press the PWR (Power) button to turn on the  
unit.  
Attaching the Front Panel  
NOTE  
1
First, insert the right side of the front panel into  
the main unit. Align the 2 small holes on the front  
panel with the 2 projections on the main unit.  
When Power is turned on for the very first time, the  
A.S.U. (Automatic Set-Up) function will be initiated  
automatically. See A.S.U. description below.  
2
Push the left side of the front panel until it locks  
firmly into the main unit.  
2
1
NOTE  
Before attaching the front panel, make sure that there is no  
dirt or dust on the connector terminals and no foreign object  
between the front panel and the main unit.  
4-EN  
 
2
Press and hold the A.S.U. (Automatic Setup)  
button for at least 3 seconds to activate the  
A.S.U. mode.  
"ASU" blinks in the display.  
The unit automatically performs the following  
operations.  
2
Press the K or L button until the desired sound  
is obtained in each mode.  
NOTE  
The BASS and TREBLE settings for each source (FM,  
AM, TAPE, and CD) are automatically memorized. These  
settings remain until you manually change them.  
1. Activates the Auto Memory mode.  
2. Gradually sets the Bass, Treble, Balance and  
Fader controls to their center positions.  
3. Gradually increases the volume to the  
position 12 in the display.  
Displaying Time  
1
Press the CLK (clock) button to display the time.  
The unit displays the clock time.  
NOTE  
4. Turns the Loudness on.  
Selecting any of the tuner, tape and CD functions while  
in the clock mode will interrupt the time display  
momentarily. The function selected will be displayed for  
about 5 seconds before the time returns to the display.  
5. Ends the A.S.U. mode.  
Turning Power On and Off  
2
Press the CLK (clock) button to turn off the time  
and to show other functions.  
1
Press the PWR (Power) button to turn on the  
unit.  
NOTE  
The unit can be turned on by pressing any other button  
except the eject c button.  
Setting Time  
1
Press and hold the CLK (clock) button for at  
least 2 seconds while the display is showing the  
time.  
The time indication will begin to blink (for 5  
seconds).  
The volume level gradually increases to the  
previous level you were listening to before the  
unit was turned off. Press the PWR button again  
to turn off the unit.  
2
3
4
Press the CT button while the time indication is  
blinking to set seconds to "0."  
Turning Loudness On/Off  
Press the H button to adjust the hours while the  
time indication is blinking.  
Loudness introduces a special low- and  
high-frequency emphasis at low listening levels to  
compensate for the ear's decreased sensitivity to  
bass and treble sound.  
Press the M button to adjust the minutes while  
the time indication is blinking.  
The time indication will stop blinking 5 seconds  
after the last adjustment. The time will  
automatically be set.  
1
Press and hold the LOUD button for at least  
2 seconds to activate or deactivate the loudness  
mode. The display shows "LOUD" when the  
loudness mode is activated.  
Adjusting Volume/Bass/Treble/  
Balance (Between Left and Right)/  
Fader (Between Front and Rear)  
1
Press the MODE button repeatedly to choose  
the desired mode.  
Each press changes the modes as follows:  
VOL  
BAS  
TRE  
FAD ←  
BAL ←  
NOTE  
If the K or L button is not pressed within 5 seconds  
after selecting BASS, TREBLE, BALANCE, or FADER  
mode, the unit automatically returns to VOLUME mode.  
5
-EN  
 
Ra d io Op e ra tion  
TUNE / A.ME  
SOURCE  
Preset buttons (1 through 6)  
D.A.P./BAND  
f UP  
DN g  
4
Press the DN g or f UP button to  
automatically seek for a station downward or  
upward respectively.  
The unit will stop on the next station it finds.  
Press the same button again to seek the next  
station.  
Manual Tuning  
1
Press the SOURCE button until radio frequency  
appears in the display.  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the radio bands as follows:  
Manual Storing of Station Presets  
F1 F2 AM  
1
Select the radio band and tune in a desired radio  
station you wish to store in the preset memory.  
3
4
Press the TUNE button repeatedly until "DX  
SEEK" and "SEEK" disappears from the display.  
2
Press and hold any one of the Preset buttons (1  
through 6) for at least 2 seconds.  
The frequency display will begin to blink.  
NOTE  
The initial mode is DX SEEK.  
Press the DN g or f UP button to move  
downward or upward one step respectively until  
the desired station frequency is displayed.  
3
4
Press the preset button into which you wish to  
store the station while the frequency display is  
blinking (within 5 seconds).  
The display stops blinking once the station has  
been memorized. The display shows the band,  
preset No. with a triangle (9) and station  
frequency memorized.  
NOTE  
"ST" indicator appears when a stereo station is tuned in.  
Automatic Seek Tuning  
1
Press the SOURCE button until radio frequency  
appears in the display.  
Repeat the procedure to store up to 5 other  
stations onto the same band.  
To use this procedure for other bands, simply  
select the band desired and repeat the  
procedure.  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the radio bands as follows:  
A total of 24 stations can be stored in the preset  
memory (6 stations for each band; FM1, FM2,  
AM and D.A.P.).  
F1 F2 AM  
3
Press the TUNE button to illuminate the DX and  
SEEK indicators in the display.  
NOTE  
If you store a station in a preset memory which already  
has a station, the current station will be cleared and  
replaced with the new station.  
With the DX mode activated, both strong and  
weak stations will be tuned in the Auto-Seek  
operation.  
Press again to return to the local mode. The DX  
indicator will turn off and the SEEK indicator will  
remain illuminated. Now, only strong stations will  
be tuned.  
6-EN  
 
Automatic Memory of Station  
Presets  
Tuning to Preset Stations  
1
Press the SOURCE button until the radio  
frequency appears in the display.  
1
Press the SOURCE button until the radio  
frequency appears in the display.  
2
Press the BAND button repeatedly until the  
desired band is displayed.  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the radio bands as follows:  
F1 F2 AM  
Each press changes the radio bands as follows:  
F1 F2 AM  
To select the D.A.P. band, press and hold the  
D.A.P. button for at least 2 seconds until the  
D.A.P. indicator appears in the display.  
3
Press and hold the A. ME button for at least 2  
seconds.  
The frequency on the display continues to  
change while the automatic memory is in  
progress.  
The tuner will automatically seek and store 6  
strong stations in the selected band in order of  
signal strength.  
3
Press the station preset button that has your  
desired radio station in memory.  
The display shows the band, preset number with  
a triangle and frequency of the station selected.  
When the automatic memory has been  
completed, the tuner goes to the station stored in  
the preset location No. 1.  
NOTE  
If no stations are stored, the tuner will return to the  
original station you were listening to before the auto  
memory procedure began.  
Storing into Direct Access Preset  
(D.A.P.) Band  
A combination of radio stations in any band (up to  
6 stations) can be manually preset into the D.A.P.  
band.  
1
Press and hold the D.A.P. button for at least 2  
seconds until the D.A.P. indicator appears.  
Press the BAND button to select FM or AM.  
The selected band will be displayed.  
To memorize stations onto the D.A.P. band,  
follow the steps for the automatic or Manual  
Storing of Station Presets section above.  
NOTE  
When using the Automatic Memory function with D.A.P.,  
the first 3 presets will be filled with FM stations and the  
last 3 are filled with AM stations.  
To cancel the D.A.P. mode, press and hold the  
D.A.P. button for at least 2 seconds. The D.A.P.  
indicator will turn off.  
7
-EN  
 
Ca sse tte Pla ye r Op e ra tion  
:/J  
c
PROG  
REPEAT  
f UP  
DN g  
B.SKIP  
P.S.UP  
P.S.DN  
Inserting/Ejecting Cassette  
Normal Play  
1
Insert a cassette tape into the slot with the open  
side facing right.  
1
Insert a cassette tape into the slot with the open  
side facing to the right.  
The player automatically starts tape playback  
and the display shows "TAPE" and the tape side  
being played ( or ).  
When the end of the tape is reached, the player  
automatically reverses the tape direction and  
plays the other side of the tape.  
When the cassette is loaded, the player  
automatically starts tape playback and indicates  
"TAPE" in the display.  
If a tape is already loaded in the cassette player,  
press the SOURCE button to select the TAPE  
mode.  
2
Press the Eject (c) button when you want to  
eject the cassette tape.  
2
3
Press the :/J button to pause the tape  
playback.  
Both tape direction indicators appear during the  
pause mode.  
Press again to resume the tape playback.  
Press the Eject (c) button to stop the tape play  
and eject the cassette.  
The tape-direction indicator disappears.  
NOTES  
When power is turned off or the front panel is  
removed, the full-logic mechanism will automatically  
switch to the PAUSE mode. This protects the tape from  
being deformed by the pinch-rollers if left for long  
periods.  
Repeat Play  
1
Press the REPEAT button and the REPEAT  
indicator appears in the display.  
The current program will be played back  
repeatedly.  
Auto Metal  
When a metal cassette tape is inserted, the player  
automatically adjusts the equalization for metal or any  
other high bias tape for optimum sound.  
The display shows "MTL."  
Press the REPEAT button to stop the repeat  
play.  
The REPEAT indicator disappears.  
8-EN  
 
Fast Forward and Rewind  
Program Sensor (P.S.)  
1
Press the DN g or f UP button during  
tape play to fast rewind or forward the tape  
respectively.  
1
Press the P.S. DN button once during tape play  
to return to the beginning of the current selection  
being played.  
The tape side indicator  
or  
blinks indicating  
If you wish to return to the beginning of a  
selection further back, press repeatedly until the  
number of selections you would like to skip is  
shown in the display.  
The display will show PS-1 with the first press  
and will increase by one with each successive  
press up to PS-9. The tape indicator will blink  
showing the direction of your search.  
the direction of the tape. When the end of the  
tape is reached in the fast rewind mode, the  
player stops automatically and begins playing  
from the beginning of the same side.  
When the end of the tape is reached in the fast  
forward mode, the player stops automatically  
and begins playing from the beginning of the  
opposite side.  
Press the P.S. UP button once during tape play  
to advance to the beginning of the next selection.  
If you wish to advance to the beginning of a  
selection further ahead, press repeatedly until  
the number of selections you would like to skip is  
shown in the display.  
2
Press the f UP button during forwarding to  
stop fast forwarding and resume tape play.  
Press the DN g button during rewinding to  
stop rewinding and resume tape play.  
The tape side indicator stops blinking.  
The display will show PS+1 with the first press  
and will increase by one with each successive  
press up to PS+9. The tape indicator will blink  
showing the direction of your search during  
searching operation.  
Blank Skip (B.SKIP)  
1
Press the B.SKIP button during tape play to skip  
over blank portions of the tape lasting 15  
seconds or longer, "B.SKIP" appears on the  
display.  
NOTES  
The program sensor feature is functional in the tape  
play mode only.  
You can advance to the 9th (max.) program or return  
to the 8th (max.) program.  
Press the B.SKIP button to cancel the blank skip  
mode.  
"B.SKIP" disappears from the display.  
Manual Reverse  
1
Press the PROG button during tape play to  
change the direction of play.  
The tape side indicators ( and ) change to  
show which side of the cassette is being played.  
9
-EN  
 
CD Cha ng e r Op e ra tion  
SOURCE  
REPEAT/M.I.X.  
CLK  
f UP  
DN g  
Preset buttons  
Controlling CD Changer (Optional)  
Music Sensor (M.S.) Skip  
1
Momentarily press the DN g button once to  
return to the beginning of the current track.  
If you wish to return to the beginning of a track  
further back, repeatedly press until you reach the  
desired track.  
The CD controls on the TDM-7574 will function  
only when a CD Changer (M-Bus) is connected.  
1
Press the SOURCE button to activate the CD  
Changer.  
Press the f UP button once to advance to the  
beginning of the next track.  
If you wish to advance to the beginning of a track  
further ahead, press repeatedly until the desired  
track is reached.  
The display shows the disc number and track  
number.  
NOTE  
To start play or pause playback, press the :/J button.  
NOTE  
2
When a 6-disc CD Changer is connected:  
Press the Preset buttons to select the desired  
disc loaded in the CD Changer.  
The music sensor feature is functional in the play or  
pause mode.  
Fast Forward and Backward  
Switching between Track No. and  
Elapsed Time Displays  
1
Press and hold the DN g or f UP button to  
quickly move backward or forward respectively  
until you reach the desired portion.  
1
Each press of the CLK (clock) button during CD  
playback causes change of the display between  
the track number and clock time.  
NOTE  
This feature works only in the CD playback mode.  
2
Press and hold the CLK (clock) button for at  
least 2 seconds while the track number is  
displayed.  
The display changes to show the elapsed time  
for the track being played.  
Repeat Play on Single Track or  
Entire Disc  
1
Press the REPEAT button to display "REPEAT"  
or "REPEAT ALL" to play back repeatedly the  
current track being played or the entire disc  
selected.  
NOTE  
Single track cannot be repeated during M.I.X. play.  
10-EN  
 
M.I.X. (Random) Play  
1
Press and hold the M.I.X. button in CD play for at  
least 2 seconds to turn on the M.I.X. mode.  
When this mode is turned on, the tracks on the  
currently playing disc will be played back in a  
random sequence.  
To cancel the M.I.X. mode, press and hold the  
M.I.X. button for at least 2 seconds.  
The M.I.X. indicator disappears from the display.  
11  
-EN  
 
Inform a tion  
CD  
In Case of Difficulty  
CD Changer not functioning.  
• Out of operating temperature range +50˚C (+120˚F)  
for CD.  
- Allow the vehicle's interior (or trunk) temperature to  
cool.  
CD playback sound is wavering.  
• Moisture condensation in the CD Module.  
- Allow enough time for the condensation to evaporate  
(about 1 hour).  
If you encounter a problem, please review the  
items in the following checklist. This guide will  
help you isolate the problem if the unit is at fault.  
Otherwise, make sure the rest of your system is  
properly connected or consult your authorized  
Alpine dealer.  
Basic  
No function or display.  
Unable to fast forward or backward the CD.  
• The CD has been damaged.  
- Eject the CD and discard it; using a damaged CD in  
your unit can cause damage to the mechanism.  
CD playback sound skips due to vibration.  
• Improper mounting of the CD Changer.  
- Securely re-mount the CD Changer.  
• Disc is very dirty.  
- Clean the disc.  
• Disc has scratches.  
- Change the disc.  
Vehicle's ignition is off.  
- If connected following instructions, the unit will not  
operate with the vehicle's ignition off.  
• Improper power lead connections.  
- Check power lead connections.  
• Blown fuse.  
- Check the fuse on the battery lead of the unit; replace  
with the proper value if necessary.  
CD playback sound skips without vibration.  
• Dirty or scratched disc.  
- Clean the disc; damaged disc should be replaced.  
Single (8 cm) disc does not play.  
• Single CD adaptor is not used.  
Radio  
Unable to receive stations.  
• No antenna or open connection in cable.  
- Make sure the antenna is properly connected; replace  
the antenna or cable if necessary.  
Unable to tune stations in the seek mode.  
You are in a weak signal area.  
- Attach a single CD adaptor (recommended by Alpine)  
to the single disc and insert into the CD magazine.  
- Make sure the tuner is in the DX mode.  
• If the area you are in is a primary signal area, the  
antenna may not be grounded and connected properly.  
- Check your antenna connections; make sure the  
antenna is properly grounded at its mounting location.  
• The antenna may not be the proper length.  
- Make sure the antenna is fully extended; if broken,  
replace the antenna with a new one.  
Broadcast is noisy.  
• The antenna is not the proper length.  
- Extend the antenna fully; replace it if it is broken.  
• The antenna is poorly grounded.  
- Make sure the antenna is grounded properly at its  
mounting location.  
Cassette  
Tape playback sounds dull.  
• The tape head needs cleaning.  
- Clean the tape head.  
12-EN  
 
Indication for CD Changer  
– – – H  
Specifications  
FM TUNER SECTION  
Tuning Range  
87.7 – 107.9 MHz  
• Protective circuit is activated due to high temperature.  
- The indicator will disappear when the temperature  
returns to within operation range.  
Mono Usable Sensitivity  
50 dB Quieting Sensitivity  
Alternate Channel Selectivity 80 dB  
9.3 dBf (0.8 µV/75 ohms)  
13.5 dBf (1.3 µV/75 ohms)  
Signal-to-Noise Ratio  
Stereo Separation  
Capture Ratio  
65 dB  
35 dB  
2.0 dB  
E - 01  
• Malfunction in the CD Changer.  
- Consult your Alpine dealer. Press the magazine eject  
button and pull out the magazine.  
AM TUNER SECTION  
Tuning Range  
Usable Sensitivity  
530 – 1,710 kHz  
22.5 µV  
Check the indication. Insert the magazine again.  
If the magazine cannot be pulled out, consult your  
Alpine dealer.  
TAPE PLAYER SECTION  
Tape Speed  
Wow & Flutter  
Tape Signal-to-Noise Ratio  
Frequency Response  
With Alpine Test Tape  
1-7/8 ips (4.8 cm/sec) ±0.7%  
0.06%  
60 dB  
• Magazine ejection not possible.  
- Press the magazine eject button. If the magazine does  
not eject, consult your Alpine dealer.  
30–20,000 Hz (±3 dB)  
– – – –  
GENERAL  
Power Requirement  
• No magazine is loaded into the CD Changer.  
- Insert a magazine.  
14.4 V DC  
(11–16 V allowable)  
Maximum Pre-Output Voltage 2 V/10k ohms  
Maximum Power Output*  
Continuous Power Output**  
35 W × 4  
15 W × 4  
T – – –  
Output Voltage  
Bass  
Treble  
500 mV/10 k ohms  
±15 dB at 30 Hz  
±10 dB at 10 kHz  
1.4 kg (3 lbs. 1 oz)  
• No indicated disc.  
- Choose another disc.  
Weight  
EEEE  
CHASSIS SIZE  
Width  
Height  
• Misconnection or disconnection of CD Changer.  
- Check connection between CD Changer and control  
unit.  
178 mm (7")  
50 mm (2")  
155 mm (6-1/8")  
Depth  
NOSEPIECE SIZE  
Width  
Height  
Depth  
170 mm (6–3/4")  
46 mm (1-13/16")  
19 mm (3/4")  
Due to continuous product improvement, specifications and  
design are subject to change without notice.  
*
Under maximum operating voltage and input signal,  
into 4 ohms.  
** 0.8% THD, at 14.4 V battery voltage.  
13-EN  
 
Insta lla tion a nd Conne c tions  
Before installing or connecting the unit, please  
read the following and pages 2 and 3 of this  
Caution  
manual thoroughly for proper use.  
USE SPECIFIED ACCESSORY PARTS AND INSTALL  
THEM SECURELY.  
Warning  
Use of other than designated parts may damage this unit  
internally or may not securely install the unit in place as  
parts that come loose may create hazards.  
USE ONLY VEHICLES WITH A 12 VOLT NEGATIVE (–)  
GROUND.  
DO NOT INSTALL IN LOCATIONS WITH HIGH  
Check with your dealer if you are not sure. Failure to do  
so may result in fire or electric shock.  
MOISTURE OR DUST.  
A high incidence of moisture or dust that penetrates into  
this unit may cause smoke or fire.  
BEFORE WIRING, DISCONNECT THE CABLE FROM  
THE NEGATIVE (–) BATTERY TERMINAL.  
Failure to do so may result in electric shock or injury due  
to electrical shorts.  
Precautions  
DO NOT CUT AWAY THE WIRE SHEATH AND USE  
Be sure to disconnect the cable from the (–) battery post  
before installing your TDM-7574. This will reduce any  
chance of damage to the unit in case of a short-circuit.  
Be sure to connect the color coded leads according to  
the diagram. Incorrect connections may cause the unit  
to malfunction or damage to the vehicle’s electrical  
system.  
POWER FOR OTHER EQUIPMENT.  
Doing so may exceed the current carrying capacity of the  
wire and result in fire or electric shock.  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT  
HINDER VEHICLE OPERATION OR CREATE  
When making connections to the vehicle’s electrical  
system, be aware of the factory installed components  
(e.g. on-board computer). Do not tap into these leads to  
provide power for this unit. When connecting the  
TDM-7574 to the fuse box, make sure the fuse for the  
intended circuit of the TDM-7574 has the appropriate  
amperage. Failure to do so may result in damage to the  
unit and/or the vehicle. When in doubt, consult your  
ALPINE dealer.  
The TDM-7574 uses female RCA-type jacks for  
connection to other units (e.g. amplifier) having RCA  
connectors. You may need an adaptor to connect other  
units. If so, please contact your authorized ALPINE  
dealer for assistance.  
HAZARDS FOR VEHICLE OCCUPANTS.  
Doing so may obstruct forward vision or hamper  
movement.  
DO NOT CONTACT, DAMAGE OR OBSTRUCT PIPES,  
FLUID LINES OR WIRING WHEN DRILLING HOLES.  
Failure to take such precautions may result in fire or cause  
an accident or injuries.  
DO NOT USE NUTS OR BOLTS IN THE BRAKE  
SYSTEM WHEN MAKING INSTALLATION OR  
GROUND CONNECTIONS.  
Never use safety-related parts such as bolts or nuts in the  
steering or brake systems or tanks to make wiring  
installations or ground connections. Using such parts  
could disable control of the vehicle and cause brake  
failure, other accident or injury.  
Be sure to connect the speaker (–) leads to the speaker  
(–) terminal. Never connect left and right channel  
speaker cables to each other or to the vehicle body.  
MAKE THE CORRECT CONNECTIONS.  
IMPORTANT  
Failure to do so may cause fire or accident to occur.  
Please record the serial number of your unit in the  
space provided below and keep it as a permanent  
record. The serial number plate is located on the  
bottom of the unit.  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR  
PINCHED.  
Route the cables and wiring so as not to be crimped by  
moving parts or make contact with sharp or pointed spots  
which might damage the wiring. Failure to do so may  
cause failure of unit or vehicle.  
SERIAL NUMBER:  
INSTALLATION DATE:  
INSTALLATION TECHNICIAN:  
PLACE OF PURCHASE:  
HAVE THE WIRING AND INSTALLATION DONE BY  
EXPERTS.  
The wiring and installation of this unit requires special  
technical skill and experience. To ensure safety, always  
contact the dealer where you purchased this unit to have  
the work done.  
14-EN  
 
Installation  
3
1
Mounting sleeve  
(Included)  
Dashboard  
Lock Pin  
Slide the TDM-7574 into the dashboard. When the  
unit is in place, make sure the locking pins are fully  
seated in the down position. This can be done by  
pressing firmly in on the unit while pushing the  
locking pin down with a small screwdriver. This  
ensures that the unit is properly locked and will not  
accidentally come out from the dashboard. Install  
the Detachable Front Panel.  
TDM-7574  
Remove the Detachable Front Panel (refer to page  
4). Slide mounting sleeve from main unit. Slide the  
mounting sleeve into the dashboard.  
Removal  
2
1. Remove the Detachable Front Panel.  
2. Use a small screwdriver (or similar tool) to  
push the locking pins to the "up" position  
(see above drawing). As each pin is  
unlocked, gently pull out on the unit to make  
sure it does not re-lock before unlocking the  
second pin.  
Metal Mounting  
Strap  
Screw  
Bolt Stud  
Hex Nut (M5)  
3. Pull the unit out, keeping it unlocked as you  
do so.  
<JAPANESE CAR>  
Ground Lead  
Chassis  
TDM-7574  
Reinforce the head unit with the metal mounting  
strap (not supplied). Secure the ground lead of the  
unit to a clean metal spot using a screw () already  
attached to the vehicle's chassis.  
Face Plate  
Connect each input lead coming from an amplifier  
or equalizer to the corresponding output lead  
coming from the left rear of the TDM-7574.  
Connect all other leads of the TDM-7574 according  
to details described in the CONNECTlONS section.  
Screw (M5 × 8)  
(Included)  
TDM-7574  
Ground Lead  
Mounting Bracket  
15-EN  
 
Insta lla tion a nd Conne c tions  
Connections  
Antenna  
2
3
POWER ANT  
Blue  
To power antenna  
REMOTE  
TURN-ON  
Blue/White  
Red  
To amplifier or equalizer  
IGNITION  
BATTERY  
4
6
Ignition Key  
Yellow  
5
GND  
Black  
7
Battery  
TDM-7574  
A
DIN Connector PIN Configuration.  
1
~
Power Supply Ground  
lgnition  
)
Shield Ground  
Data Ground  
Lch  
SIG GND  
Battery  
Data Bus  
A
8
+
Rch  
Gray  
9
SPEAKER  
RIGHT  
FRONT  
Gray/  
Black  
!
"
Front right  
Violet/  
Black  
SPEAKER  
RIGHT  
REAR  
Violet  
Green  
#
$
Rear right  
Speakers  
Rear left  
SPEAKER  
LEFT  
REAR  
Green/  
Black  
%
&
White/  
Black  
SPEAKER  
LEFT  
FRONT  
(
White  
Front left  
CD Changer  
(Sold Separately)  
Amplifier  
,
16-EN  
 
1 Antenna Receptacle  
2 Power Antenna Lead (Blue)  
Connect this lead to the +B terminal of your  
power antenna, if applicable.  
NOTE  
This lead should be used only for controlling the vehicle's  
power antenna. Do not use this lead to turn on an  
amplifier or a signal processor, etc.  
3 Remote Turn-On Lead (Blue/White)  
Connect this lead to the remote turn-on lead of  
your amplifier or signal processor.  
4 Switched Power Lead (Ignition) (Red)  
Connect this lead to an open terminal on the  
vehicle's fuse box or another unused power  
source which provides (+) 12V only when the  
ignition is turned on or in the accessory position.  
5 Fuse Holder (15A)  
6 Battery Lead (Yellow)  
Connect this lead to the positive (+) post of the  
vehicle's battery.  
7 Ground Lead (Black)  
Connect this lead to a good chassis ground on  
the vehicle. Make sure the connection is made to  
bare metal and is securely fastened using the  
sheet metal screw provided.  
8 Power Supply Connector  
9 Right Front (+) Speaker Output Lead (Gray)  
! Right Front (–) Speaker Output Lead (Gray/  
Black)  
" Right Rear (–) Speaker Output Lead (Violet/  
Black)  
# Right Rear (+) Speaker Output Lead (Violet)  
$ Left Rear (+) Speaker Output Lead (Green)  
% Left Rear (–) Speaker Output Lead (Green/  
Black)  
& Left Front (–) Speaker Output Lead (White/  
Black)  
( Left Front (+) Speaker Output Lead (White)  
) DIN Connector  
Connect this to the DIN connector on the CD  
Changer.  
~ Rear Output RCA Connectors  
RED is right and WHITE is left.  
+ DIN Extension Cable  
NOTE  
For some installations, an L-type DIN connector would  
simplify installation. Use the Alpine 491002 Adapter  
(Sold Separately) if your changer did not include an L-  
type DIN.  
, RCA Extension Cable (Sold Separately)  
17-EN  
 

2SW LSRC 26925SW LSRC 26923SW LSRC 26940SW LSRC 26940TT User Manual
Acoustic Research Surge Protector ARO6 User Manual
ADC Clothes Dryer ML 75 User Manual
Aiphone Pet Fence SBX LSE User Manual
American Standard Outdoor Shower T5050X User Manual
AO Smith Water Heater AOSRG45900 User Manual
Avocent Switch SC8 DVI User Manual
BC Speakers Speaker 12HPL64 User Manual
Behringer Musical Instrument PMH1000 User Manual
Behringer Stereo Amplifier MX882 User Manual